One Hour One Life Forums

a multiplayer game of parenting and civilization building

You are not logged in.

#1 2018-05-29 15:39:45

Enforcerke
Member
Registered: 2018-05-29
Posts: 1

Segmentation fault on Linux Ubuntu

I'm running Linux Ubuntu 18.04 LTS,
processor: Intel® Core™ i7-4510U CPU @ 2.00GHz × 4
GPU: GeForce 840M/PCIe/SSE2,
my pc is 64-bit, I downloaded the source files and all the required packages as stated HERE,
After running ./pullAndBuildLatest and then running ./OneLifeApp, the game started, it loads some stuff, like animations etc. But after its done with loading the "transitions", it closes and reports a segmentation fault. This is my command prompt output:

./OneLifeApp 
Local epoch time  = -3600
GMT epoch time  = 0
Decompressing took 0.000000 seconds
Loaded 985 tagged sprites from sprites folder
Loaded 226 sound IDs from sounds folder
Decompressing took 0.011000 seconds
Loaded 713 animations from animations folder
Finished loading animation bank in 0.348000 sec
Decompressing took 0.011000 seconds
Object id 793 (The Apocalypse) seen as an apocalypse trigger
Loaded 925 objects from objects folder
  Auto-generated 532 'used' objects
  Auto-generated 210 'variable' objects
Finished loading object bank in 0.765000 sec
Decompressing took 0.000000 seconds
Loaded 54 categories from categories folder
Finished loading category bank in 1.182000 sec
Decompressing took 0.002000 seconds
Frame rate = 49.382714 frames/second
Loaded 1226 transitions from transitions folder
Auto-generated 638 transitions based on categories
Segmentation fault (core dumped)

Running it with super user privileges has no different effect.

Offline

#2 2018-05-29 17:43:21

jasonrohrer
Administrator
Registered: 2017-02-13
Posts: 4,805

Re: Segmentation fault on Linux Ubuntu

As a sanity check, I just ran pullAndBuildLatest on my end, and the game launches and reaches the login screen without crashing.


Can you run it inside GDB and see where the crash is happening?

There are instructions for this in a sticky thread in the main forum.

Offline

#3 2018-06-01 02:22:04

Jookia
Member
Registered: 2018-06-01
Posts: 1

Re: Segmentation fault on Linux Ubuntu

I'm hitting this after pulling today. Backtrace:

[New Thread 0x7ffff1449700 (LWP 18661)]
[New Thread 0x7fffe7948700 (LWP 18663)]
Decompressing took 0.000000 seconds
Loaded 1007 tagged sprites from sprites folder
Loaded 232 sound IDs from sounds folder
Decompressing took 0.005000 seconds
Loaded 728 animations from animations folder
Finished loading animation bank in 0.356000 sec
Decompressing took 0.004000 seconds
Object id 793 (The Apocalypse) seen as an apocalypse trigger
Loaded 956 objects from objects folder
  Auto-generated 582 'used' objects
  Auto-generated 210 'variable' objects
Finished loading object bank in 0.868000 sec
Decompressing took 0.000000 seconds
Loaded 56 categories from categories folder
Finished loading category bank in 1.302000 sec
Decompressing took 0.001000 seconds
Frame rate = 46.860355 frames/second
Loaded 1276 transitions from transitions folder
Auto-generated 612 transitions based on categories

Thread 1 "OneLifeApp" received signal SIGSEGV, Segmentation fault.
initTransBankFinish () at transitionBank.cpp:507
507	                                transCats[n]->objectIDSet.getElementDirect( p );
(gdb) bt
#0  initTransBankFinish () at transitionBank.cpp:507
#1  0x000000000040a97c in drawFrame (inUpdate=<optimized out>) at game.cpp:1471
#2  0x00000000004dd86d in GameSceneHandler::drawScene (this=0x9f67a0) at ../../minorGems/game/platforms/SDL/gameSDL.cpp:3055
#3  0x00000000004b15c4 in callbackDisplay () at ../../minorGems/graphics/openGL/ScreenGL_SDL.cpp:2848
#4  0x00000000004b391f in ScreenGL::start (this=0x7d9930) at ../../minorGems/graphics/openGL/ScreenGL_SDL.cpp:2064
#5  0x00000000004dfabd in mainFunction (inNumArgs=<optimized out>, inArgs=<optimized out>) at ../../minorGems/game/platforms/SDL/gameSDL.cpp:2483
#6  0x00007ffff64d5530 in __libc_start_main () from /nix/store/vn6fkjnfps37wa82ri4mwszwvnnan6sk-glibc-2.25/lib/libc.so.6
#7  0x00000000004079da in _start () at ../sysdeps/x86_64/start.S:120
(gdb) info locals
n = <optimized out>
newTransIDs = {-1, 1018, 0, 1019}
p = 0
transIDs = {-1, 1018, 0, 1019}
transCats = {0x45e, 0x126e320, 0x0, 0x126e410}
patternSize = <optimized out>
numPatternsInTrans = <optimized out>
i = 2
numObjects = 1748
(gdb) frame 1
#1  0x000000000040a97c in drawFrame (inUpdate=<optimized out>) at game.cpp:1471
1471	                        initTransBankFinish();
(gdb) info locals
progress = <optimized out>
(gdb) frame 3
#3  0x00000000004b15c4 in callbackDisplay () at ../../minorGems/graphics/openGL/ScreenGL_SDL.cpp:2848
2848			handler->drawScene();
(gdb) info locals
handler = <optimized out>
h = 0
s = 0x7d9930
(gdb) frame 4
#4  0x00000000004b391f in ScreenGL::start (this=0x7d9930) at ../../minorGems/graphics/openGL/ScreenGL_SDL.cpp:2064
2064	        callbackDisplay();
(gdb) info locals
frameStartSec = 1527819676
frameStartMSec = 159
event = {type = 1 '\001', active = {type = 1 '\001', gain = 0 '\000', state = 1 '\001'}, key = {type = 1 '\001', which = 0 '\000', state = 1 '\001', keysym = {
      scancode = 0 '\000', sym = SDLK_UNKNOWN, mod = KMOD_NONE, unicode = 0}}, motion = {type = 1 '\001', which = 0 '\000', state = 1 '\001', x = 0, y = 0, xrel = 0, yrel = 0}, 
  button = {type = 1 '\001', which = 0 '\000', button = 1 '\001', state = 0 '\000', x = 0, y = 0}, jaxis = {type = 1 '\001', which = 0 '\000', axis = 1 '\001', value = 0}, 
  jball = {type = 1 '\001', which = 0 '\000', ball = 1 '\001', xrel = 0, yrel = 0}, jhat = {type = 1 '\001', which = 0 '\000', hat = 1 '\001', value = 0 '\000'}, jbutton = {
    type = 1 '\001', which = 0 '\000', button = 1 '\001', state = 0 '\000'}, resize = {type = 1 '\001', w = 0, h = 0}, expose = {type = 1 '\001'}, quit = {type = 1 '\001'}, 
  user = {type = 1 '\001', code = 0, data1 = 0x0, data2 = 0x0}, syswm = {type = 1 '\001', msg = 0x0}}
frameTime = <optimized out>
oversleepMSec = 0
(gdb) frame 5
#5  0x00000000004dfabd in mainFunction (inNumArgs=<optimized out>, inArgs=<optimized out>) at ../../minorGems/game/platforms/SDL/gameSDL.cpp:2483
2483	    screen->start();
(gdb) info locals
flags = <optimized out>
sdlResult = <optimized out>
widthFound = 1 '\001'
readWidth = <optimized out>
heightFound = 1 '\001'
readHeight = <optimized out>
fullscreenFound = 1 '\001'
readFullscreen = <optimized out>
fullscreen = <optimized out>
useLargestWindowFound = 1 '\001'
readUseLargestWindow = <optimized out>
useLargestWindow = <optimized out>
frameRateFound = 1 '\001'
readFrameRate = <optimized out>
recordFound = 1 '\001'
readRecordFlag = <optimized out>
recordGame = <optimized out>
speedControlKeysFlag = <optimized out>
outputAllFramesFlag = <optimized out>
blendOutputFramePairsFlag = <optimized out>
testFile = <optimized out>
customData = <optimized out>
hashSalt = <optimized out>
forceBigPointer = <optimized out>
hardToQuitFound = 1 '\001'
readHardToQuit = <optimized out>
languageNameFile = <optimized out>
readTarget = 60
readCounting = <optimized out>

Offline

#4 2018-06-01 17:29:45

jasonrohrer
Administrator
Registered: 2017-02-13
Posts: 4,805

Re: Segmentation fault on Linux Ubuntu

Found and fixed.  I'll push a build out in a bit.

Offline

#5 2018-06-01 23:56:31

jasonrohrer
Administrator
Registered: 2017-02-13
Posts: 4,805

Re: Segmentation fault on Linux Ubuntu

Fix pushed.

Offline

Board footer

Powered by FluxBB